Item Code: HIRSCH-HP28F120
Price: $569.12

 

Rear lift forces cause instability at high speeds,
and the perfect solution to address
this issue is to add a bootlid spoiler that
raises the airflow and provides a clear
separation point for an optimized
wake behind the car.

The Hirsch Performance bootlid spoilers

are optimized primarily to improve high

speed stability, and therefore they are

slightly larger and have a slightly

steeper rake to produce optimal

aerodynamic results.

The styling is functional and minimalistic

with no grooves or decorations.

The spoilers are delivered primed,

and can be painted - either as the

designer intended in two tone with

matte black underside and body

colour on top - or

completely in body colour.

 

 

 

 

 

Item Code: HIRSCH-HP22F114
Price: $582.35

 

The front corner splitters were developed

to help direct airflow away from the

front wheels. They generate downforce

at higher speeds and

help to reduce the aerodynamic drag.

The front splitters are made

of high-quality PUR.

The front splitters are delivered primed,

and can be painted - either as the

designer intended in matte

black - or in body colour.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Item Code: HIRSCH-HP23F115
Price: $608.82

 

Improved cooling air flow helps keep
the engine temperature under control,
and improves the performance of the
intercooler. Therefore, the Hirsch
Performance honeycomb grill kit has
large openings that allow maximum
airflow. However, the outer upper
grills remains closed like on the
original grill, to achieve lower

aerodynamic drag, and ensure
that splashing water does not
enter the engine's air intake snorkel.

The upper 3-piece grill is available
separately, and fits Aero, Vector
and Linear cars. The lower grill
with integrated spoiler is available
only for the Aero trim level.

The honeycomb grill is produced in
injection-molded high-quality UV-stablized
ABS, to ensure that the matt black finish
remains beautiful for many years, with the
best possible resistance against chipping and
|harsh cleaning agents. As a sign of
authenticity, a Hirsch Performance emblem
in matt chrome that matches the
original grill frame is integrated
in the upper grill.

Item Code: HIRSCH-HP27F119
Price: $622.06

 

Rear lift forces cause instability at high
speeds, and the perfect solution to address
this issue is to add a bootlid spoiler that
raises the airflow and provides a clear
separation point for an optimized wake
behind the car.

The Hirsch Performance bootlid spoilers are
optimized primarily to improve high speed
stability, and therefore they are slightly larger
and have a slightly steeper rake
to produce optimal aerodynamic results.

The styling is functional and minimalistic
with no grooves or decorations. The
spoilers are delivered primed, and can
be painted - either as the designer intended
in two tone with matte black underside and
body colour on top - or
completely in body colour.

 

 

 

 

 

Item Code: HIRSCH-HP26F118
Price: $688.24

 

With the installation of a diffuser under the
rear bumper, the airflow under the car is stabilized
and directed upwards, thus improving
stability and reducing the wake behind the car.

The Hirsch Performance diffuser features two
round openings for either the Saab Original
dual exhaust or the Hirsch Performance dual
exhaust. The diffuser has been specially designed
to fit both the longer SportCombi and
the shorter SportSedan/Convertible
bumpers, as well as both the Aero trim level
and Vector/Linear trim levels. The diffuser
is compatible with the Saab Original towing
hooks, and features markings for the
required cut-out on the inside of the diffuser.

The diffuser is delivered in matte black high-quality
UV-stablized ABS. The kit includes rivets for
installation. The bumper reflectors
(not included in the kit) are moved
over from the original bumpers to the diffuser.

 

 

Item Code: HIRSCH-HP25F117
Price: $714.71

 

Improved cooling air flow helps keep the engine
temperature under control, and improves the
performance of the intercooler. Therefore,
the Hirsch Performance honeycomb grill kit
has large openings that allow maximum airflow.
However, the outer upper grills remains
closed like on the original grill, to achieve
lower aerodynamic drag, and ensure
that splashing water does not
enter the engine's air intake snorkel.

The upper 3-piece grill is available separately,
and fits Aero, Vector and Linear cars.
The lower grill with integrated spoiler is
available only for the Aero trim level.

The honeycomb grill is produced in
injection-molded high-quality UV-stablized
ABS, to ensure that the matt black finish
remains beautiful for many years, with the
best possible resistance against chipping and
harsh cleaning agents. As a sign of
authenticity, a Hirsch Performance emblem
in matt chrome that matches the original
grill frame is integrated in the upper grill.

Item Code: HIRSCH-HP12F90
Price: $765.88

 

It was difficult to optimize the sport chassis
of the Saab 9-3. None of the spring/shock
absorber combinations which were initially tested
were able to outperform the Saab Original

Sports Suspension. In the end, only by
|lowering the centre of gravity while
keeping very close to the original sports
suspension was a result achieved which lived
up to the high expectations of the typical
Swiss perfectionism at Hirsch Performance:
even better driving dynamics and an even sportier shape.

At 20 mm lower than the Saab Sport Suspension,
the car gains a sporty, purposeful look. The
sports suspension's lowered centre of gravity
also gives you a clear advantage in driving
dynamics, improving both braking and cornering
performance. The lowered stance also reduces
the aerodynamic drag by covering more of the
wheels, and improves high speed stability
through reduced aerodynamic lift
thanks to the reduced ground clearance.

 

 

Item Code: HIRSCH-HP33R25
Price: $794.12

 

The wheel has been optimised
using state-of-the art FEM technology
to ensure an even load distribution
and minimum deformations. Further,
the mass of the spokes and
hub were also significantly reduced.

Flowforming technology has been used
to achieve an outstanding weight/stiffness
ratio. With this technology, the rim of
the wheel could be made extraordinary
lightweight. The precise flowforming
manufacturing also ensures perfect
roundness and that the minimum
amount of balance weights is required.
These are differences that may be hard
to notice for the untrained eye,
but you may notice the smooth,
vibration-free ride.

The new wheel has been engineered
specially for the new Saab 9-5 and 9-3,
ensuring optimal handling characteristics.
With Hirsch Performance Accessories,
your Saab Original Warranty remains valid.

Item Code: HIRSCH-HP34R35
Price: $1,005.88

 

Hirsch Performance has developed an alloy
wheel in outstandingly stylish and distinctive
design, enhancing the appearance of your Saab.
The high-performance wheel is manufactured
using a low-pressure casting process.
These wheels will only fit the 9-3 and
require a steering lock to
prevent wheel well interference.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Item Code: HIRSCH-HP36R47
Price: $1,005.88

 

8 X 19" 6-Twin Spoke Rim Silver
(NOT PICTURED)

Item Code: HIRSCH-HP35R46
Price: $1,005.88

 

Hirsch Performance has developed an alloy wheel
in outstandingly stylish and distinctive design,
enhancing the appearance of your Saab. The
high-performance wheel is manufactured
using a low-pressure casting process. These
wheels will only fit the 9-3 and require a
steering lock to prevent wheel well interference.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Item Code: HIRSCH-HP06F60
Price: $2,682.35

 

The best sounding Saab ever. For those who
enjoyed the sound of the Turbo X, here is
more of the same! Despite the distinctively
sporty sound, the Hirsch Performance sports
exhaust for the V6 XWD has been finely tuned
to avoid the typical booming at motorway speeds
that can be an annoying companion for many
sports exhausts. This exhaust system was
developed for the recently launched Saab 9-3
Performance by Hirsch special edition vehicle.
The sound could be described, but
should be experienced.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Item Code: HIRSCH-HP30F122
Price: $913.24

 

For the Hirsch Performance roof spoiler for the
Saab 9-3, a Saab innovation from 1961 was
put to use again in a modernised form: the
air slicer. The top surface of the air-slicing
roof spoiler directs the airflow upwards, generating
improved rear stability. In addition, an air slot
directs a small portion of the airflow down
onto the rear screen, thus reversing the
semi-stationary vortex behind the car and
thereby reducing the wake and the
associated aerodynamic drag, while
also helping to keep the rear screen clean.

This design was extensively tweaked and
tested in the MIRA wind tunnel, to
create an optimal combination
of drag and stability.

The styling continues the smoothly curved
wing design theme established with
the Hirsch Performance 9-5 roof spoiler.

The roof spoiler is delivered primed, and can be
painted - either as the designer intended in
two tone with matte black underside and
body colour on top - or completely in body colour.

The kit includes brake light extension cables
to be used with the existing brake light,
which is positioned in the spoiler, and an
extension hose and nozzle for the rear screen washer.